78 61 125 ESD | Electronics Super Knips® | Multi-Component Handle | Burnished Head / Tool Steel - 125mm

SKU: 78 61 125 ESD

Price:
Sale price
82.99 AED

Tax included

Stock:
In stock, 2 units

Product Description

78 61 125 ESD Electronic Super Knips® ESD
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Electrically discharging handles - dissipative. Ground, very sharp cutting edges without bevel. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. special tool steel, burnished.
  • Cutting capacities medium hard wire (diameter): Ø 1.2 mm
  • Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
  • Jaw length (B): 9 mm
  • Jaw thickness (joint) (D): 7.5 mm
  • Head width (A): 13.5 mm
  • ESD: yes
  • Technical attributes

     Length:125 mm
     Width:77 mm
     Height:13 mm
     Weight:55 g

    Detailed description

    Cut abutting, fine wire accurately – ESD protection for electronics

    Extremely sharp cutting edges made from oil-hardened, highgrade special tool steel

    The Knipex Electronic Super Knips is made from special tool steel. The cutting edges are ground without bevel and hardened to approx. 64 HRC for flush cutting. Thanks to the precision tips, it is also possible to cut fine wire accurately, e.g. wire touching enclosures and components.

    Work involving dexterity: low weight and smooth operation

    Great dexterity is needed when working on electronic components and in precision engineering. Due to its frictionless handle spring, the Knipex Electronic Super Knips 78 61 125 ESD is so smooth-running that energy can be dispensed very precisely – with dexterity. Opening spring and opening restrictor simplify work further.


    ESD protection to prevent uncontrolled electrostatic discharge

    Sudden discharge resulting from electrostatic charging differences is a concern especially in electronics. The Knipex 78 61 125 ESD prevents sudden discharge. With these pliers, electrostatic energy is discharged in a constant, controlled manner via the handles. The handles are conductive – they are not insulating – and therefore permit a slow charge equalisation. With the ESD protection through dissipative discharge, the Knipex 78 61 125 ESD Electronic Super Knips satisfies the strict standards IEC TR 61 340-5, DIN EN 61 340-5 and SP Method 2472.

    Knipex 78 61 125 ESD Electronic Super Knips: high safety and quality

    The Knipex Electronic Super Knips provides ESD protection conforming to standards for work on sensitive electronics, and is highly valued by radio technicians, industrial electricians, mechatronics engineers and electronics engineers.

    Further arguments speak in favour of these electronics pliers: the particularly smooth operation, low weight, outstanding cutting precision and long tool life.

    These advantages are the visible results of decades of toolmaking experience, continuous development and Knipex’s commitment to high quality standards: from selection of materials and machining, through to finishing.


    Short overview

    • Precision pliers for the finest cutting work in electronics and precision engineering: shear cut with controlled micro cutting edge misalignment
    • Thanks to precisely shaped tips, also cut abutting wires accurately as from Ø 0.2 mm
    • Cutting capacity of soft wire Ø 0.2 -1.6 mm
    • Cutting capacity for mediumhard wire Ø 1.2 mm
    • ESD protection of electronics through conductive multicomponent grips, there is a slow, controlled discharge of electrostatic energy
    • Very smooth operating thanks to frictionless handle spring
    • Manufactured according to Knipex standards: for ideal work results and a long tool life
    • Manufactured from high-grade special tool steel, oil-hardened and polished
    • Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC
    • Length 125 mm
    • Weight 56 g

    Recently viewed